Cast Resin Dry Type Distribution Transformer is a important electrical device that is used in AC power distribution systems to step up/down voltages to meet the incoming power requirements of connected equipment.
1.Phase: 3 phases
2.Rated power: 100kVA
3.Primary voltage: 6kV
4.Secondary voltage: 0.4kV
6.Vector group: Dyn11
7.Insulation class: H/F Class
Dry Type Transformer Advantage.
1. Low loss, low noise, low partial discharge.
2. Strong anti-short circuit capability and high anti-lightning impact level.
3. Excellent moisture resistance for operation at 100% relative humidity.
4. Strong overload capability for long-term operation at 150% loading.
Technical characteristics for 100kVA 6 kV cast resin dry type transformer
|Transformer type||Cast resin dry type transformer|
|Transformer Model||100kVA 6/0.4kV|
|Origin of Country||Guangdong, China|
|Short circuit impedance||4%|
|Core material||Silicon sheet|
|Degree of protection||IP00-IP56|
|Temperature rise||H(125K)/F(100K) Class|
|Insulation material||Cast resin (HV)
|Insulation level||Primary: 20kV AC
Secondary: 3kV AC
|BIL||60kV for primary circuit|
|Type of installation||Indoor|
Application: Cast resin dry type transformer is widely applied to the power grid, solar power plant, wind power plant, hydropower plant, nuclear power plant, infrastructure, real estate, etc…
After-sales Service: We have a professional aftersales engineer team, each aftersales engineer has more than 3 years of experience. And we also have localized technical backup to offer timely support in Malaysia, South Africa, Egypt, Dubai, UAE, Brazil.
The core is manufactured from cold-rolled grain oriented (CRGO) silicon steel. The steel sheets are cut into required dimensions on automated machines thereby ensuring reduced air gap low exciting current and low noise. Each lamination is insulated from each other to ensure a long trouble-free lifetime of the core. Using 45° stepping all leaning lamination way to laminate. So the no-load current are reduced efficiently.
Windings are uniformly insulated and its material could be coopper and aluminum.
Full power tappings is provided in the LV wiinding. Tap changing settings is implemented as per client’s or contract’s datasheet, with pad-lockable slots on each tap change position.
Established in 1958, located in Guangzhou City, Pearl Electric Co., Ltd is one of the most prominent power transformer manufacturer in China which design, produce and supply power transformers in domestic and abroad, occupying an area of 100,00 m2 among 70,000m2 of modern factory building with over 660 employees.
Top Brand in China for Class 1E dry type transformer of nuclear power plant application.
Industrial Leader for new energy application substation transformer and energy conservation transformer.
Transformer Test Report:
For all transformers developed and supplied by Pearl Electric, Type tests and Specials Tests have been carried out in internationally recognized independent test labs, and test reports have been obtaining, including:
1. C2/E2/F1 test report for cast resin dry-type transformer.
2. Aging test report for cast resin dry-type transformer.
3. Aseismatic report for cast resin dry-type transformer.
4. Type and special test reports for class 1E dry type transformer for nuclear power station application.
5. Type and special test reports for various traction/excitation transformers.
6. Type and special test reports for amorphous alloy core dry type transformer.
Copyright © Pearl Electric Co., Ltd.